Twin-Star International Classic Flame 23DE9047 Manuel D'instruction page 4

2. Locate the Center Left Front Panel (H), Center
Right Front Panel (I), Center Front Panel (T),
and set out face down on a scratch-free surface.
Insert one Wood Dowel (N) into each of the
pre-drilled holes.
Push the Center Left Front Panel and Center
Right Front Panel snug to the Center Front
Panel. Make sure the Wood Dowels are seated
in the pre-drilled holes.
Connect the Center Left Front Panel (H),
Center Right Front Panel (I) and Center
Front Panel (T) with Connection Plate, tighten
Screws (Y1) through the pre-drilled holes.
3. Attach the completed assembly from step 1 to
the completed assembly from step 2, Screw the
Bolts (L) through the Plastic Connector (Z1) to
the Center Left Side Panel (B) and Center
Right Side Panel (C), then using Bolts (L)
through the holes in the Plastic Connector (Z1)
and tighten.
E-3
Center Front Panel
T
Center
Right
I
Front
Panel
D
C
Center
H
Left
Front
Panel
B