Palmer PETIMEP Mode D'emploi page 6

7
FOOTSWITCH
This toggles the pedal on/off. When off the pedal's circuitry is
completely removed from the signal path (true bypass).
8
LED
When lit the pedal is on. This also serves as a battery level indi-
cator.
REAR
9
IN
Using a quality instrument cable with 1/4" plugs connect your gui-
tar to this jack.
10
9V DC INPUT
Connect an optional 9V DC power supply to this socket. For details
please refer to "POWER REQUIREMENTS".
11
PRE/POST PUSHBUTTON
This switches the compressor before (pre) or after (post) the delay
providing unique control of the delay trail level and decay.
12
OUT
Using a quality instrument cable with 1/4" plugs connect this jack
to the input of your guitar amplifier or the next stompbox in your
signal chain.
6