Parental Settings Menu Operation; Timers; Setting Programme Timers - TECHWOOD TKR 26 B 62 N Mode D'emploi

After coding the correct PIN number, parental settings
menu will be displayed:

Parental Settings Menu Operation

• Select an item by using "
• Use " " or " " button to set an item.
• Press OK button to view more options.
Menu Lock: Menu lock setting enables or disables
the menu access. You can disable access to the
installation menu or the whole menu system.
Maturity Lock: When set, this option gets the maturity
information from the broadcast and if this maturity level
is disabled, disables access to the broadcast.
Child Lock: When Child Lock is set, the TV can only
be controlled by the remote control. In this case the
control panel buttons will not work. Hence, if one of
those buttons is pressed, Child Lock Is On will be
displayed on the screen when the menu screen is
not visible.
Set PIN: Defi nes a new PIN number. Use numeric
buttons to enter a new pin number. You will need
to code your new pin a second time for verifi cation
purposes.
IMPORTANT: The factory default pin number is 0000,
if you change the pin number make sure you write it
down and keep it safe.
Note: If the Country option is set to France, you can
use 4725 as the default code.
02_MB62_[GB]_(01-TV)_1910UK_DVB T_PVR_BRONZE19_(woypbpr)_26906W_10079453_50220714.indd 66 02_MB62_[GB]_(01-TV)_1910UK_DVB T_PVR_BRONZE19_(woypbpr)_26906W_10079453_50220714.indd 66
" or " " button.
English - 66 -

Timers

To view Timers menu, press MENU button and select
Settings icon by using " " or " " button. Press OK
button to view Settings menu. Use " " or " " button
to highlight Timers and press OK to continue:
Setting Sleep Timer
This setting is used for setting the TV to turn off after
a certain time.
• Highlight Sleep Timer by using "
• Use " " or " " button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.

Setting Programme Timers

You can set programme timers for a particular
programme using this feature.
Press " " button to set timers on an event. Programme
timer function buttons will be displayed on the
screen.
Adding a Timer
• Press YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Channel: Changes network type by using " " or " ".
Timer Type: You can select timer type as Record
or Timer.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End: Enter an ending time using the numeric
buttons.
Duration: Displays duration between the starting and
ending time.
Repeat: Sets a timer to be repeated as Once, Daily or
Weekly. Use " " or " " buttons to select an option.
C h a n g e / D e l e t e : S e t s t h e c h a n g e / d e l e t e
permission.
Playback: Sets the playback permission and parental
settings.
" or " " button.
25.04.2012 15:29:24 25.04.2012 15:29:24