OK button. After this operation, a recording becomes
set to the selected programme.
•
To cancel an already set recording, highlight that
programme and press the OK button and select
the option "Delete Rec. Timer". The recording will
be cancelled.
Note: You cannot switch to any other channel or
source while there is an active recording on the
current channel.
Set Timer / Delete Timer
After you have selected a programme in EPG menu,
press the OK button and and Options screen will
be displayed. Select "Set Timer on Event" option
and press OK button. You can set a timer for future
programmes.
To cancel an already set reminder, highlight that
programme and press the OK button. Then select
"Delete Timer" option. The timer will be cancelled.
Note: It is not possible to record or set timer for two or
more individual events at the same time interval.
Digital Teletext (** for UK only)
• Press the ""TXT"" button.
•
The digital teletext information appears.
•
Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
•
When the "
"TXT"" button is pressed, the TV returns
to television broadcasting.
•
With digital broadcasting (DVB-T-C), in addition to
digital teletext broadcasting together with the normal
broadcasting, there are also channels with just digital
teletext broadcasting.
•
The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
•
When you press the "
"TXT"" button again, the digital
teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
"TELETEXT" explanations
02_MB62_[GB]_(01-TV)_1910UK_DVB T_PVR_BRONZE19_(woypbpr)_26906W_10079453_50220714.indd 53
02_MB62_[GB]_(01-TV)_1910UK_DVB T_PVR_BRONZE19_(woypbpr)_26906W_10079453_50220714.indd 53
First Time Installation
IMPORTANT: Ensure that the aerial or cable is
connected and a Common Interface module is not
inserted before switching on the TV for the fi rst
time installation.
•
When the TV is operated for the fi rst time, installation
wizard will guide you through the process. First,
language selection screen will be displayed:
•
Use "
" or " " buttons to select your language
and press OK button to set selected language and
continue.
•
After selecting the language, "
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
•
By pressing "
" or " " button, select the country
you want to set and press " " button to highlight
Teletext Language option. Use " " or " " button
to select desired Teletext Language.
•
Press "
" button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
You can set Scan Encrypted as Yes if you want to
scan coded stations.Afterwards select the desired
Teletext Language.
•
Press
OK button on the remote control to continue
and the following message will be displayed on the
screen:
English - 53 -
Welcome!" screen will
25.04.2012 15:29:11
25.04.2012 15:29:11