Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
VAX04101
HDMI eARC Pass Switch 4×1
Instruction manual and technical information
Dear customer,
Thank you for purchasing this high quality product. Please read these instructions before installa-
tion to ensure optimum use and safety. Please keep this manual for future reference.
Functions:
• HDMI switch for the operation of up to 4 HDMI sources on one HDMI sink (TV / projector)
• One HDMI input supports eARC (enhanced Audio Return Channel) and can be connected to
the HDMI-eARC connector of a soundbar
• Audio EDID management
• Supports Ultra-HD up to 4K 60Hz as well as HDR10, HLG-HDR and Dolby Vision
Hint:
When changing the settings on the TV or Audio-EDID on the switch, please note that it may be
necessary to restart the connected devices. If you do not obtain the desired output or display,
please proceed as follows:
• Switch on the desired Audio EDID mode on the switch and select the desired HDMI source.
• Disconnect all devices from the power supply for a few seconds, i.e. pull the power plug.
• Then plug in the power plugs and switch on the devices in the following order: TV, sound sys-
tem, HDMI switch, HDMI source
Audio formats
The supported audio formats are negotiated between the devices. You can influence this using the
EDID control (EDID = Extended Display Identification Data, this data identifies an HDMI sink to the
HDMI source).
7.1
If set to 7.1 this allows the HDMI source to recognize that all audio formats are accepted. Please
note that your sound system should support eARC to process all audio formats including Dolby
10
Publicité
Table des Matières
