FeinTech VAX04101 Instructions D'utilisation page 13

1. HDMI inputs 1 to 4, please use ARC to Sound 1 for the connection of a soundbar
2. HDMI output for the connection of a TV or video projector - HDMI-ARC is supported
3. Micro-USB connector for service
4. Connector for the DC plug of the mains adaptor
Scenarios
1 - Playback from HDMI source, sound via soundbar in 5.1 or 7.1 format
Switch on eARC and select the sound format 5.1 or 7.1 (Dolby Atmos) at the switch. Then select
the desired HDMI source at input 2, 3 or 4. Note: Parallel sound output via the television is also
possible.
2 - Playback of the TV sound (Sat/CATV or Apps) via the soundbar
Switch on eARC at the switch and select input 1 (ARC to Sound). Activate HDMI-ARC on the TV if
not already done. Please make sure that the TV is connected with its HDMI-ARC port to the switch
and the HDMI cable supports ARC.
3 - Use as a normal HDMI switch
Switch off eARC. Then select the desired HDMI source 1 to 4. If there are other sources connected
to your soundbar via HDMI, they can be played. If available, you can access the soundbar menu
this way.
Safety
• Please do not cover the housing or power supply, or install the device to avoid overheating.
• Keep away from fire, heat sources, water and moisture.
• Do not place heavy objects on the device or the connection cables.
• Do not open or drill holes in the housing.
• Use only the supplied power adaptor or ensure identical performance data when replacing.
• Use only a soft, dry cloth to clean the surface of the unit. Please do not use aggressive clean-
ing agents, gasoline or the like.
• If the unit will not be used for a longer period of time, please unplug it from the mains.
13