Scan An Image - HP Photosmart C8100 Série Guide D'utilisation

2. Insert a memory card into the appropriate slot on the HP All-in-One, or connect a
storage device to the front USB port.
The Photosmart Express menu appears, with the most recent photo shown on the
display.
3. Touch Save.
The Save Photos menu appears.
4. Touch Save to CD/DVD.
When the photos have been saved to the CD or DVD, the Photosmart Express menu
appears.
TIP: You can also save photos to a CD or DVD by touching CD/DVD on the main
screen, then choosing Backup Memory Card in the LightScribe CD/DVD menu.
To create a LightScribe disc label
1. On the Photosmart Express menu, touch Create.
2. On the Create screen, touch
LightScribe Labeling, then touch this project.
3. When prompted, load a LightScribe CD or DVD with the label side down.
The visual keyboard appears.
4. Use the visual keyboard to enter titles and subtitles that identify your CD or DVD, and
touch Done on the visual keyboard when you are finished.
5. In the Label Summary screen, touch Burn.
At the printing status screen, touch Return to Main Menu to continue with any non-
disc tasks while disc labeling continues in the background.
For more information on how to read or burn a CD/DVD, or use the LightScribe functions
see the onscreen Help.

Scan an image

You can start a scan from your computer or from the control panel of the HP All-in-One.
This section explains how to scan from the control panel of the HP All-in-One only.
NOTE:
images. Using this software, you can edit a scanned image and create special projects
using a scanned image.
Scan an original to a computer
You can scan originals placed on the glass by using the control panel.
You can also use the software you installed with the HP All-in-One to scan
or to scroll through the projects until you find
Scan an image 27