Vortice Reg Depuro Plus Notice D'emploi Et D'entretien page 41

ENGLISH
Record 34: End of time programming period 1 TUESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 35: Start time schedule period 2 TUESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 36: End of time programming period 2 TUESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 37: Start time schedule period 1 WEDNESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 38: End of time programming period 1 WEDNESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 39: Start time schedule period 2 WEDNESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 40: End of time programming period 2 WEDNESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 41: Start time schedule period 1 THURSDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
41