Air Duct Connections; Inverting The Air Flows - Vasco EnergyPlus ENY–P1 Manuel D'installation, Utilisation Et Entretien

Level the unit using the 4 feet (six for size
4)
Turning the bolt in the mounting feet rai-
ses or lowers the corner of the unit. In this
way, the unit can be adjusted to be made
horizontal.
OK
OK

AIR DUCT CONNECTIONS

Typical Ceiling Installation
C
Typical Floor Installation
B
C
LEGENDA:
A = Fresh air
B = Supply air
C = Exhausted air
D = Extracted air
INVERTING
THE AIR FLOWS
Where necessary, it is possible to invert the air
flows in the pipeline at the configuration Dip
switch 1 on the electronic power board. This
causes the intake fan to act as an extraction fan
and the board inverts the functions of the probes,
so the air intake probe will be detected and
considered as the extraction air probe.
Sensor Standard Air Flow Rate
Id.
.
Rated Size
T-EP wall con-
trol tempera-
T1 Fresh Air
T2 Supply air
T3 Extracted air
T4 Exhausted air
137
A
B
A
Inverted Air Flow Rate
Variable Id. Rated Size
ture
t1 Extracted air
t2 Exhausted air
t3 Fresh Air
t4 Supply air
English
D
D
Variable Id.
T-EP wall con-
trol tempera-
ture
t3
t4
t1
t2