Operation; Before Running The Robot; Running The Robot - Blaupunkt XEASY Manuel D'utilisation

5. OPERATION

5.1

Before running the robot

Make sure that before you start running the robot:
•
You have prepared the area (see section 4.3 and section 4.4).
•
The robot has been charged (see section 4.5).
•
The floor environment has been cleaned of all fragile objects and cords,
clothing, paper and loose cables.
•
All curtains and drapes are lifted off the floor to avoid any possible
accidents.
•
Make sure that the power switch is on.
•
Place the robot in the charging station.
48
Table 8 - Activating the cleaning modes
explained for different control types
5.2

Running the robot

Press on MODE
Spot N/A
on the remote
control twice.
Choose Mode 1.
Auto Press the ON/
Press the
Start/Stop OFF button
button (once or twice)*
(once or Or choose
twice)*
Mode 2.
Edge N/A Press MODE
on the remote
control. Choose
Mode 3.
ZigZag N/A Press MODE
on the remote
control. Choose
Mode 4.
Send to N/A Press HOME
charging
station
* Depending on the robot's status
** Only works when the robot is in Standby
Tap on EN: Alexa, ask Bluebot
OPERATION.
to start area cleaning
Select SPOT.
DE: Alexa, starte Spot-
Reinigung mit Bluebot
Tap on START **
EN: Alexa, ask Bluebot
or tap on to start cleaning
OPERATION
DE: Alexa, starte die
and Select Reinigung mit Bluebot
AUTO.
Tap on EN: Alexa, ask Bluebot
OPERATION. to start edge cleaning
Select EDGE. DE: Alexa, starte Rand-
Reinigung mit Bluebot
Tap on EN: Alexa, ask Bluebot
OPERATION. to start zigzag cleaning
Select ZIGZAG. DE: Alexa, starte Zig-
zag-Reinigung mit
Bluebot
Tap on "Re- EN: "Alexa, ask Bluebot
charge" in the to start charging"
Operation DE: "Alexa, lade den
screen Bluebot auf"