4. GETTING STARTED
4.1
Unpacking the box
1. Unpack the robot carefully and remove all wrapping material.
2. Check the if the package contains all accessories (see Section 3.2). If any
item is missing, please contact your reseller.
We recommend that you retain the original carton and packing materials in
case it ever becomes necessary to return your robot for service. You can only
return the robot in the original carton and packing materials otherwise the
warranty will expire. This is the only way to safely protect the robot against
damage in transit. If you do dispose of the carton and the packing materials,
please remember to recycle with due care to the environment.
4.2
Mounting the brushes
Place the side brushes as shown in Figure 6.
The side brushes are indicated with "L" and "R". Make sure the L/R mark on
the side brush matches the L/R mark on the base of the robot.
Figure 6 - Mounting the brushes
EN
41