Maintenance And Care; Contact Information - CALIMA 46057 Notice D'utilisation

5.2 APPLICATION COMPENSATES HEIGHT DIFFERENCES
WHEN THE WHEEL IS DRIVEN ONTO THE RAMP
Assemble the parts into a combination that suits your needs,
picture 2 - 3.
Picture 2: Assembly example 1
Picture 3: Assembly example 2
Picture 4: Assembly example 3
Place the assembled leveller wedge in front of the wheel of your
caravan/motorcaravan.
Drive carefully onto the leveller wedge, ask a second person to
help direct you.
Once you have reached your nal position, ensure
that the vehicle cannot roll away (handbrake,
chocks).
5. 3 APPLICATION SUPPORT LEGS COMPENSATE
HEIGHT DIFFERENCES
You can use one of the following combinations, picture 5 and 6,
to support the supporting leg.
Picture 5: Assembly example 4
Picture 6: Assembly example 5
Here, the supporting leg must have a large contact surface or
foot.
Do not place the supporting leg with its sharp
metal edge on the leveller, as this could damage it
and impair stability.

6. MAINTENANCE AND CARE

6.1 MAINTENANCE
The levelling wedge set is maintenance-free if used as intended.
Check the parts for damage after each use. Damaged or faulty
parts may not longer be used.
6.2 CARE
Only clean the parts with water and a brush. Do not use any
aggressive cleaning agents or solvent-based cleaners. Do not use
a high-pressure cleaner.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Dispose of the levelling wedge set in the recycling bin or through
a recycling centre.

8. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
5