Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. OPERATING INSTRUCTIONS
5.1 OVERVIEW
1 Trestle
2 Threaded spindle
3 Nuts
4 Cross bars
5 Support plates
6 Rubber pads
5.2 ASSEMBLY
Place the threaded spindle (Position 2 in the overview) in the trestle (Position 1 in the overview). The nut (No. 3 in the overview) must interlock
with the hexagonal insert in the trestle, Figure 3.
Press the rubber pad onto the support plate
5.3 SUPPORTING THE MOBILE HOME / CARAVAN
Rotate the threaded spindle anticlockwise in the trestle until it fits under your vehicle. Place the trestles on firm ground under the chassis of your
mobile home or caravan. If the ground is soft, such as sand or a forest floor, use packing plates, (e.g. Calima floor plates, item number 46010) or
similar. Only provide support for the vehicle at intended fixed points on the frame, authorised by the manufacturer, never directly on the floor of
the vehicle. To do this, read the manual of your vehicle or ask your specialist workshop. EAL GmbH assumes no liability for non-compliance. Rotate
the threaded spindle until the support plate (Position 5 in the overview) lies firmly against the frame of the vehicle. The trestles prevent rolling
and pitching movements when entering the mobile home / caravan on the campsite.
Never lift the vehicle with the trestles.
6. MAINTENANCE AND CARE
6.1 MAINTENANCE
The trestles do not need to be maintained if the product is used correctly.
6.2 CARE
Clean the trestles after each use. Grease the threads lightly. When not using the trestles, keep them safe from moisture and dust.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Dispose of the trestles in accordance with local regulations or via a scrap metal collection..
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Deutschland
Figure 2: Overview
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
Figure 3: Assembly
Publicité
Table des Matières
