Moving The Unit - Galassia 8 Notice D'installation, D'utilisation Et D'entretien

4. INSTALLATION
Install the appliance in a dry and easily accessible place both to facilitate
its use and to carry out cleaning and maintenance. The area around the
equipment must be kept clear. It is particularly important to avoid
obstructing the cooling outlets located on the sides of the machine.
The appliance must be installed at least 20 cm from the walls of
the room or from other equipment.
Place the machine in a suitable and safe room, well lighted and
sufficiently aired, to allow the working, the cleaning and the ordinary
maintenance. A minimum distance also allows to work under safety
conditions, preventing from any possible crushing and/or dragging between
the bowl and the wall.
The machine is self steady and does not need any further anchorage to
the ground.
A check must be made to ensure that the temperature and relative
humidity never exceed the maximum and minimum values indicted in the
specifications (see Tab. 3.1) even when the machine or other machines in
the room are functioning.
Exceeding these values especially the temperature or the maximum
relative humidity can easily and unexpectedly damage electrical equipment
creating hazardous situations.

4.3 Moving the unit

The appliance is supplied complete with all its parts in its own packaging
closed and held together with straps.
The appliance must be offloaded from the transport vehicle using an
appropriate moving equipment. Whilst it is being raised, avoid tugging or
sudden movement. To transport the appliance to its place of installation
use a wheeled trolley with an adequate weight capacity.
12
Fig. 4.1. Place the machine
GALASSIA