Kenwood PEEK & view TTP310 Série Mode D'emploi page 3

As with all new heating elements,
G
your toaster may emit a slight
burning smell when it is first
switched on. This is normal and not
a cause for concern.
key
warming rack
Peek & View™ carriage lever
(with 'Hi-Rise™' for extra lift)
crumb tray
browning control
button with indicator light
defrost button with indicator light
cancel button with indicator light
warming rack selector
cord storage
to use your toaster
1 Plug the toaster into the power
supply.
2 Move the browning control to the
desired setting. Use a low setting
for light toasting and for thin or dry
bread.
3 Insert the bread, muffins, bagels etc.
4 Lower the lever
'cancel' button will illuminate. (The
lever will not stay down unless the
toaster is plugged in).
To toast frozen bread, once the
G
bread is lowered press the 'defrost'
button. The 'defrost' button will
illuminate.
5 To toast a single slice of bread, place
the bread into the
the carriage lever and press the
button. The
button will illuminate.
Use the carriage lever to lift the toast
G
to Peek & View™ at any time
without cancelling the toasting cycle.
To stop toasting during the cycle,
G
press the 'cancel' button, the toast
will pop up and the 'cancel' button
light will go off.
6 Your toast will pop up
automatically, to raise it higher, lift
the lever.
until it locks. The
, lower
hints on using your
toaster
Select a lower setting for light
G
browning or for dry bread.
Dry/stale bread toasts more quickly
G
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
For best results ensure that the
G
bread slices are of an even
thickness, freshness and size.
In order to achieve uniform browning
G
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.
warming rack safety
1 Never set the browning control
higher than
warming rack.
2 Never completely cover the warming
rack.
3 When using the warming rack, never
wrap the food up. Plastic wrapping
will melt and could catch fire. Foil will
reflect heat, damaging the toaster.
4 If you're using the toast slots, lower
the warming rack so it can't burn
you.
to use the warming rack
1 Raise the warming rack into position
by pressing down on the warming
rack selector
2 Put your food on top of the rack
(slicing thick items in half will speed
up the warming process).
3 Set the browning control no higher
than . Lower the lever.
4 The lever will automatically rise at the
end of the warming cycle. Turn the
items over and repeat the operation.
Watch to make sure they don't burn.
3
when using the
.