Black & Decker YARDMASTER BCASBL70 Mode D'emploi page 9

Fig. B
12
Installing and Removing Attachments
(Fig. A, C, D)

WARNING:
circumstances should this product be used near water.

WARNING:
within the base unit become hot during use. Avoid
contact with moving parts within base unit when
removing and installing accessories.

WARNING:
battery from the base unit. Remove any accessory
from the attachment before removing or installing
the attachment.

WARNING:
not place fingers or other objects inside the base unit,
other than the attachments designed to work with the
base unit.
1. To fit an attachment or the extension pole to the base
unit 1 , align the attachment/pole base with the base
unit as shown in Fig. C and Fig. D.
2. Firmly push the attachment or extension pole onto the
base unit until it snaps into place and an audible click
is heard.
nOTE: Attachments fit onto the extension pole in the same
manner as the base unit.
3. Ensure attachment is securely attached to the base
unit or extension pole by gently pulling it away. The
attachment or the extension pole should remain in place.
4. To remove an attachment or extension pole, depress
the release button
8
the attachment or extension pole and pull attachment
or extension pole away from the base unit or
extension pole.
nOTE: Only use attachments that are specifically designed
for and are compatible with the base unit.
Shock hazard. Under no
Burn hazard. Moving parts
Before assembly, remove the
To reduce the risk of injury, do
or located on the side of
10
Fig. C
9
13
Fig. D
6
Proper Hand Position (Fig. E, F)

WARNING:
personal injury, ALWAYS use proper hand position
as shown.

WARNING:
personal injury, ALWAYS hold securely in anticipation
of a sudden reaction.
Base mode, proper hand position requires one hand on the
main handle 2 .
Pole mode, operate with one hand on the main handle
and one hand on the pole handle
Fig. E
10
8
To reduce the risk of serious
To reduce the risk of serious
.
7
English
1
1
2
2
7