GB
Steam Iron
Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label.
This product complies with all binding CE
labelling directives.
Familiarisation
1.
Soleplate
2.
Water level indication
3.
Rating label
4.
Base stand
5.
Spray nozzle
6.
Water fi ll hole
7.
Steam control button
8.
Temperature control knob
9.
Spray button
10. Steam jet button
11. Indicator lamp
12. Handle
13. Swivelling anti-kink covering
14. Power cord
Important safety instructions
∙ Do not leave the steam iron
unattended while connected. Always
remove the plug from the wall socket,
even if you leave the room only for a
short while.
∙ Do not use the iron if it has been
dropped onto a hard surface, or
if it shows any sign of damage or
leakage.
∙ The iron must be used and stored on
a stable and durable surface only.
∙ Even with the iron placed on its back
rest, ensure that this too is on a
stable and durable surface.
∙ In order to avoid hazards, repairs
to this electrical appliance or its
power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
∙ Before cleaning the appliance,
ensure it is disconnected from the
power supply and has cooled down
completely.
∙ To avoid the risk of electric shock, do
not clean the appliance with water
and do not immerse it in water.
∙ Before refi lling or emptying the water
reservoir, remove the plug from the
wall socket.
9