Absaar 12T AB-HP12 Mode D'emploi page 45

Do not use a damaged or malfunctioning Jack!
Jack cannot
function at
its rated
weight
capacity.
Pump stroke
feels spongy
PROBLEM
Saddle cannot
be lifted all
the way.
Oil leaking
from the oil fi ll
plug.
POSSIBLE
SOLUTION
NOTE: Make Certain That
The Jack Is Not Supporting
A Load While Attempting A
Solution.
M.S.A. International - 5 rue Bommel - L-4940 HAUCHARAGE - LUXEMBOURG
Tel: 00352/26.65.65
DE FR EN EN
×
Valves may be
blocked or may not
be closed fully.
To fl ush the valves:
1. Lower the
Saddle and
securely close
Check that
the Valve
the Valve
Release Screw.
Release Screw
is fully closed.
2. Manually lift
the saddle
several inches.
3. Open the Valve
Release Screw
and force the
saddle down
as quickly as
possible.
e-mail: infos@msainternational.com
45
× ×
×
×
Low oil in the
Bottle Jack.
Check the oil
level and refi ll
if needed.
Bleed the Bottle
Jack. - Refer to
the section of
"BLEEDING THE
BOTTLE JACK".
×
Too much
hydraulic oil in
the Bottle Jack.
Check oil level
and adjust if
needed.