Absaar 12T AB-HP12 Mode D'emploi page 39

With the help of the Parts List and the corresponding diagram, lay out and identify all pieces
before assembly.
1. First, slide both of the Feet (G) under the Side Supports (H) respectively. Then place the
Cross-brace (D) between the side supports with both of its ends resting on the Feet. Make
sure that the holes of the (D) (H) (G) align exactly with each other. Now fi x them in place
using fasteners (M
2. Place the Top Beam (E) horizontally to the upper ends of the Side Supports (H). Align the
holes of the top beam with those of the side supports and secure them with fasteners
(M ).
2
DE FR EN EN
D
G
).
2
39
H
M
2
Figure 2
M
2
E
H
Figure 3