Settings; Phone Settings; Call Settings - JabloCom JabloPhone GDP-04i Guide Utilisateur

The o
menu offers these functions for each contact:
Ptions
e
Dit
c
all
s sms
enD
a ...
DD new
D
elete
D
elete all
i sim allows copying all contact records from your SIM card into the phone's memory. Select c
mPort From
context key for confirmation.
The contact records list on the SIM card contains one phone number for each contact only. The num-
bers which already are in the phonebook will not be imported again to prevent possible duplicates.
The advanced SIM phonebook management is available via JabloTool software running on connected
PC.

Settings

The specific parameter setting is available under m
Use to navigate in the menu and to set up the selected value of the numeric parameter. For confirmation of a
setting, press oK or

Phone settings

• Date & Time
Select m , then s
enu ettings
• Languages
There can be up to 20 languages supported in the GDP-04i interface (the exact number depends on the firmware
version). The language is chosen automatically according to the country code of your SIM card. The phone interface
can be switched to another language under this menu.
• Network selection
The GDP-04i selects a suitable GSM network automatically. Manual selection can be used in some cases.
• Display Contrast
The LCD Display contrast is selectable in a range from 0 to 63.

Call settings

• Call divert
Incoming calls can be diverted to a specified number. The following actions are available for all divert services: a
, c (deactivates the service) or c
vate ancel
Call divert can be applied in specific cases:
a
ll calls
i
F busy
i
F no answer
i
F unreachable
c
ancel all Diverts
Active unconditional divert may be indicated in standby screen, network permitting.
• Call waiting
To activate the call waiting service, select a
status, select c
hecK status
• Call barring
Outgoing and incoming calls can be barred if the appropriate network service is available. You can select the types of
calls, which will be barred:
GDP-04.i.ENG.MAN.User_Manual.15.B
- opens the edit dialog window to edit the contact details
- dials the selected contact or the specific number if more numbers are stored under the
contact name
- sends a text message
- adds a new contact into the phonebook
- deletes the selected contact from the phonebook (the name with all its phone numbers)
- deletes all contacts from the phonebook
. Select b
or
acK
, followed by P
hone settings
hecK status
- all incoming calls will be diverted to the specified number
- incoming calls will be diverted if you are on another call or you reject the call by
- incoming calls will be diverted if you do not pick up the call after a pre-set period
of time selected in the dialog box - from 5, 10, 15, 20, 25 to 30 seconds
- incoming calls will be diverted if the phone is switched off or there is no GSM
network signal
- cancels all previously selected call diverts
ctivate
.
, s
.
enu etting
to leave the parameter unchanged.
and D &
ate time
(to view the current service setting).
. To deactivate, select c
ancel
- 9 -
to set the date and time.
. To show the current service
oPy
EN
-
cti