Entering The Key Code - Toshiba GP-1040 Mode D'emploi

The key code should be entered by the machine administrator. The service technician
unpacks and performs all settings except the key code entry. When the service
technician asks you to enter the key code, follow the procedure below.
* Be especially careful that no one sees the key code when you enter it.
1
Check the menu on the touch panel of the
equipment.
- If the menu is different from the one on the right,
ask the service technician about it.
2
Open the envelope in which the key code is
written.
- Before you open it, make sure that it is completely
unopened.
3
Enter the key code, and then press the
[ENTER] button.
- The key code has 32 symbols in total including let-
ters of the alphabet and numbers. Enter the letters
of the alphabet from A to F with the touch panel
and key in the numbers with digital keys.
* The key code in the right-hand screen is an
example.
If you make an inputting error, you can delete it by
going backward one by one with the [CLEAR] button.

Entering the key code

- 9 -