Symbols On The Power Tool; Important Safety Information; Intended Use - Flex CHE 5-40 SDS-max Notice D'instruction D'origine

CHE 5-40 SDS-max
Contents
Symbols used in this manual . . . . . . . . 11
Symbols on the power tool . . . . . . . . . . 11
Important safety information . . . . . . . . . 11
Noise and vibration . . . . . . . . . . . . . . . . 12
Technical specifications . . . . . . . . . . . . 13
Overview . . . . . . . . . . . . . . . . . . . . . . . . 14
Operating instructions . . . . . . . . . . . . . . 15
Maintenance and care . . . . . . . . . . . . . . 17
Disposal information . . . . . . . . . . . . . . . 18
-Declaration of Conformity . . . . . . . . 18
Exemption from liability . . . . . . . . . . . . . 18
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE!
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Wear ear protection!
Use lightweight breathing
protection!!
Disposal information for the old
machine (see page 18)!
Protection class II
(completely insulated)

Important safety information

WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Before using the power tool, please read
and follow:
these operating instructions,
-
the "General Power Tools Safety Rules"
-
in the enclosed booklet (leaflet
315.915),
the currently valid site rules and the
-
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.

Intended use

The hammer drill and chisel hammer
CHE 5-40 SDS-max is designed
- for commercial use in industry and trade,
- for hammer drilling in masonry and
concrete for compound/injection anchor
attachment and through-holes,
- for simple trimming work to remove
plaster, masonry and light concrete,
- to be used with suitable tools recommen-
ded by the manufacturer for this power
tool.
no.:
-
11