Philips S5000 Série Mode D'emploi page 34

ENGLISH
34
Problem
The shaver is not
entirely clean
after I clean it in
the SmartClean
system.
The SmartClean
system does not
work when I
press the on/off
button.
The shaver is
not fully charged
after I charge it in
the SmartClean
system.
Possible cause
You have not
placed the shaver in
the SmartClean
system properly, so
there is no electrical
connection
between the
SmartClean system
and the shaver.
The cleaning
cartridge is empty.
The replacement
symbol lashes to
indicate you have to
replace the cleaning
cartridge.
You have used
another cleaning
luid than the
original Philips
cleaning cartridge.
The SmartClean
system is not
connected to the
mains.
You have not placed
the shaver in the
SmartClean system
properly.
Solution
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.
Place a new cleaning
cartridge in the SmartClean
system (see chapter 'Cleaning
and maintenance').
Only use the original
Philips cleaning cartridges.
Put the small plug in
SmartClean system and
put the adapter in the wall
socket.
Make sure you press the
shaver in the SmartClean
system until it locks into
place and press down the
top cap.