LaserLiner MultiFinder Pro Mode D'emploi page 19

Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning
agents, scouring agents and solvents. Remove the battery(ies)
before storing for longer periods. Store the device in a clean and
dry place.
Technical data
Detection range AC
Operating conditions
Storage conditions
Power supply
Dimensions (W x H x D)
Weight (incl. battery)
Measuring depth
Wood/metal beam location
(STUD-SCAN)
Targeted metal location:
Ferro-Scan/Non-Ferro-Scan
(METAL-SCAN)
Targeted location of live
supply lines (AC-SCAN)
Location of dead
supply lines
Subject to technical alterations. 18W37
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must
be collected separately for disposal according
to the European Directive on waste electrical
and electronic equipment.
Further safety and supplementary notices at
http://laserliner.com/info?an=AGM
MultiFinder Pro
110 - 230V, 50 - 60 Hz
0°C ... 40°C , Max. humidity
80% rH, no condensation,
Max. working altitude 2000 m
above sea level
-20°C ... 70°C,
Max. humidity 80% rH
1 x 9 V alkaline battery
(type 6LR 61)
80 mm x 186 mm x 40 mm
230 g
Up to 4 cm depth
Up to 10 cm /
up to 5 cm depth
Up to 4 cm depth
Up to 4 cm depth
19
EN