Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Anleitung_BT_BJ_900_1E_SPK1:_
GB
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1 / 2)
1
ON/OFF switch
2
Star grip for angle adjustment
3
Setting wheel for cutting depth
4
Additional handle
5
Adapter for dust extraction system
6
Dust bag
7
Face spanner
8
Locking knob for changing the cutter
9
Base plate
10 Angle stop
11 Drive motor
12 Star grip for height adjustment
3. Items supplied
Open the packaging and take out the equipment
with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
10
25.10.2010
13:37 Uhr
Seite 10
If possible, please keep the packaging until the
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
Original operating instructions
Safety instructions
BT-BJ 900
Case
Adapter for dust extraction system
Dust bag
Face spanner
4. Proper use
The biscuit jointer is designed for cutting slots for
biscuit joints in solid wood, plywood and
particleboard.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
Voltage:
230 V ~ 50 Hz
Power rating:
860 watts
Idling speed:
11,000 rpm
Cutter dimensions:
ø 100 x ø 22 x 3,8 mm
Cutting depth:
max. 14 mm
Angle settings:
Protection class:
Weight:
0°-90°
II /
3.01 kg
Publicité
Table des Matières
