Deactivating The Security Function - Sony VGP-UHDM25 Mode D'emploi

Deactivating the security function

If you want to deactivate the security function of the drive, follow the steps.
Note
Make sure that the ACCESS lamp is off before deactivating the security function.
1
Connect the drive to the personal computer and touch the
wireless key receiver with the wireless key to unlock.
2
Turn the drive upside down and open the lid, then press the
CANCEL button, using a thin tool, such as the point of a
pen.
The LOCK and UNLOCK indicator flashes alternately for about one
second, then the UNLOCK indicator lights.
The security function is deactivated. When you connect the drive to the
personal computer using the USB cable next time, you can use the hard
disk drive without the wireless key.
z
Tip
• If you want to use the security function again, you must register the wireless keys again
(page 16).
• The personal computer illustration in this manual may appear different from your
model.
Note
If you leave the hard disk drive unattended when the security is deactivated, not only is
your data unprotected, but someone could also register other wireless keys (not yours) to
the hard disk drive. It is recommended that you enable the security function whenever you
leave the hard disk drive unattended.
VGP-UHDM25_4-107-783-11 (1)
GB
19