4
Touch the wireless key receiver with the other wireless key
after the blue light of the wireless key receiver starts to flash
again.
The blue light will go out after the wireless key is registered.
z
Tips
• The blue light of the wireless key receiver repeats this pattern: it flashes twice and
goes out for about one second. If you do not touch the wireless key receiver with
the wireless key for more than about 5 seconds, the blue light of the wireless key
receiver goes out and the previous status returns. In this case, follow the procedure
from step 1 again to register the wireless key.
• If the blue light of the wireless key receiver keeps flashing even after touching the
wireless key receiver with the wireless key, you may have touched it with the first
key by mistake. Try touching with the other key.
5
Disconnect the drive from the personal computer.
Both keys are now registered. The security function will be activated
from the next time you connect the USB cable to the personal
computer.
Continued on next page
VGP-UHDM25_4-107-783-11 (1)
GB
17