Important Instructions; Product Description; Safety Instructions; Set Up And Configuration - Petromax fe45 Mode D'emploi

Masquer les pouces Voir aussi pour fe45:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USER MANUAL
Thank you for purchasing the Petromax Dutch
Oven Table! With a Dutch Oven Table, you
can cook outside on a grand scale: The table
offers you a safe stand and cooking surface for
cast-iron Dutch ovens, skillets, and more, at a
comfortable work height of 87 cm (34.25 in).
Thanks to the generously sized windbreak,
you can even save energy and charcoal when
cooking outside. The Dutch Oven Table can
also be used without support legs.

IMPORTANT INSTRUCTIONS

Please read this user manual carefully
before using the Petromax Dutch Oven
Table for the first time. Follow the safety
instructions. If another person is using the
product, please provide this user manual.

PRODUCT DESCRIPTION

The small Table fe45 with a work surface of 45
x 45 cm (17.7 x 17.7 in) is suitable for 1-3 Dutch
ovens (depending on the size). However, for up
to 3 or more Dutch ovens (depending on the
size), the big table fe90 with a work surface
of 45 x 90 cm (17.7 x 35.4 in) is better suited.
Both tables offer a comfortable work height
of 87  cm (34.25  in). The windbreak, which
is to be attached with wing bolts, makes the
charcoal and briquettes burn longer at a high
temperature, and you can thus save energy
when cooking and baking. The hangers at the
front and the sides provide hanging options
for bbq and coal tongs, kitchen towels or bar-
becue gloves. The massive support legs (hight
ca. 7.5 inch / ca. 19 cm) prove to be particu-
larly sturdy: The fe45 can carry up to 80  kg
(176 lb) and the fe90 up to 100 kg (220 lb)
(respective maximum surface loading). The
tables can also be used without support legs
(hight ca. 7.5 inch / ca. 19 cm) and are then
perfectly suited for stacking Dutch ovens, one
on top of the other.

SAFETY INSTRUCTIONS

• Only use the Dutch oven table outdoors.
Do not use indoors as a cooking area. Fire
4
hazard and danger of suffocation. Always
comply with fire safety regulations.
• Caution! Risk of burning! The table can
become extremely hot when used with
briquettes and charcoal.
• Always place the table on a solid, even and
steady surface. On a soft ground, the legs
can subside, and the table would not stand
upright anymore.
• Risk of injury! Avoid rickety structures by not
stacking more than two Dutch ovens on the
table. Do not exceed the maximum surface
loading.
• Never leave the table unattended when
burning briquettes and charcoal on it. Watch
over children and animals close to the table.
• Do not move the Dutch Oven Table when it is
in use or hot. Let it cool down entirely after
use.
• Wait until the ashes and rests of charcoal are
completely cold before removing them, and
dispose of them properly. Never throw hot
ashes in the household waste!
SCOPE OF DELIVERY
• 1x Dutch Oven Table fe45 or fe90
• 4x support leg
• 4x clamping lever for support leg
• 1x windbreak with hinges for folding it up
• 4x wing bolt for windbreak
MODELS
Figure 1: fe45

SET UP AND CONFIGURATION

1. Put the support legs in the device on the
table and tighten them with the clamping
lever. Now set the table upright.
Figure 2: fe90

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fe90

Table des Matières