easydriver safetyre Instructions D'utilisation page 16

7.3 The basic view
The status of the assigned sen-
sors is displayed in the basic
view.
The symbols have the following meaning:
The tyre has not yet been assigned a sen-
sor.
There is no connection to the sensor.
The sensor has a connection. The measu-
red values are in the normal range.
The measured values are outside the set
limits.
Further details are indicated by additional status icons:
Status of the Bluetooth connection
The symbol lights up if data have been received
within the last 3 minutes.
Tyre pressure too high / too low
The symbol lights up when the tyre pressure is
outside the set range.
Battery capacity status
The symbol lights up when the battery capacity
is exhausted. Replace the battery quickly.
Tyre temperature too high
The symbol lights up when the tyre temperatu-
re is above the set value.
GB6