brennenstuhl SL DN 2806 S SKII IP54 Mode D'emploi page 5

SMD LED tripod lamp
4. Do not use the work lamp in explosive environments in which flammable liquids, gases or
dusts are present. risk to life!
5. LED lights are extremely bright. Do not look directly at the lamp.
6. Damaged protective covers must be replaced with an original Brennenstuhl® protective cover
before the light can be used again.
7. If the mains supply cable of the device is damaged it must be replaced by a qualified technician
in order to avoid risks.
8. Make sure the light is attached firmly and securely. Make sure the cable is not crimped or
otherwise damaged.
9. Keep children away from the lamp. Children cannot estimate the risk of electric shock.
MaINTENaNcE:
PLEASE NOTE: The LED light does not contain parts that need servicing.
The LED light source cannot be replaced. If necessary, replace the entire light.
Never open the lamp when the mains supply cable is connected.
risk of life due to electric shock!
cLEaNINg:
Do not use solvents, corrosive cleaners or the like.
Use a dry or slightly moist cloth for cleaning only.
DISPOSaL:
Dispose of electrical devices in an environmentally responsible manner!
Do not dispose of electrical devices with household rubbish!
In accordance with European Directive 2012/19/EU regarding electrical and electronic
devices must be collected separately and sent in for recycling.
Please contact your local authorities for available disposal options for your worn-out device.
addresses
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 – 3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
www.brennenstuhl.com
BA_Stativ_SMD_LED-Leuchte_16P048_1-17560-0_SL-DN-2806-S-SK-II.indd 5
Operating Instructions
D
5
07.07.16 15:45