Technical Specification - Defort DDT-1400A Mode D'emploi

Masquer les pouces Voir aussi pour DDT-1400A:
Table des Matières

Publicité

GB
Brushcutters
INTENDED USE
Before using our brush cutter, please read this manual
carefully to understand the proper use of your unit.
Keep this manual handy.

TECHNICAL SPECIFICATION

Engine Type
Rated Output Power, W
Displacement, сm
3
No-load speed, rpm
Fuel tank capacity, L
Gasoline/oil mixing ratio
Cutting line, мм
Weight, kg
PRODUCT ELEMENTS
1
Handle
2
Shoulder Strap
3
Air cleaner
4
Blade
5
Clamp
6
Engine switch button
9
Throttle lever
12 Outer pipe
13 Safety guard
15 Fuel tank
16 Starter
SAFETY
Instructions contained in warnings within this
manual marked with a symbol concern critical
points which must be taken into consideration
to prevent possible serious bodily injury, and for this
reason you are requested to read all such instruc-
tions carefully and follow them without fail.
4
Air cooled
2-stroke petrol
1400
42,70
7000
1,1
25:1
2
5,50
1
WARNING LABELS ON THE MACHINE
Read owner's manual before operating this
machine
Wear head, eye and ear protection.
Warning/Attention.
Keep children, bystanders and helpers
15 meters away from the brush cutter.
IMPORTANT! If warning seals peel off or be-
come soiled and impossible to read, you
should contact the dealer from which you
purchased the product to order new seals and affi x
the new seal in the required location.
WARNING! Never remodel your brush cutter.
We won't warrant the machine, if you use the
remodeled brush cutter or you don't observe
the proper usage written in the manual.
SAFETY
Before using the machine
• Read this owner's manual carefully to understand
how to operate this unit properly.
• This product has been designed for use in cutting
grass, and it should never be used for any other pur-
pose.
• You should never use this brush cutter when under
the infl uence of alcohol, when suffering from ex-
haustion or lack of sleep when suffering from drow-
siness as a result of having taken cold medicine, or
at any other time when a possibility exists that your
judgment might be impaired or that you might not
be able to operate the brush cutter properly and in a
safe manner.
• Avoid running the engine indoors. The exhaust gas-
es contain harmful carbon monoxide.
• Never use your brush cutter under circumstances
like those described below: When the ground is
slippery or when other conditions exist which might
make it not possible to maintain a steady posture
while using the brush cutter.
• At night, at times of heavy fog, or at any other times
when your fi eld of vision might be limited and it
would be diffi cult to gain a clear view of the area.
• During rain storms, during lightning storms, at times
of strong or gale-force winds, or at any other times
when weather conditions might make it unsafe to
use this product.
• When using this product for the fi rst time, before be-
ginning actual work, learn to handle the brush cutter
from skilled worker.
• Lack of sleep, tiredness, or physical exhaustion re-
sults in lower attention spans, and this in turn leads
to accidents and injury. Limit the amount of time over
which the brush cutter is to be used continuously for
somewhere around 30-40 minutes per session, and
take 10-20 minutes of rest between work sessions.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

93728649

Table des Matières