T'nB SPCAMHD2 Mode D'emploi page 16

VIDEO mode
VIDEO
To record a video, make sure that the camera is in video mode.
If the Video icon is not displayed on the LCD screen of your camera, press
times until it appears.
To start recording :
Press and release the pressure. The camera emits a beep and the red and green status
indicator lights blink during the recording, a red dot also appears on the LCD screen.
To stop recording :
Press and release the pressure. The camera emits a beep and the red and green status
indicator lights stay on, but do not blink, the recording is then interrupted.
VIDEO mode display
Without recording
(no red dot)
00:00:00
720P
00/00/00 00:00:00
30
multiple
VIDEO mode display
During recording
(appearance of a blinking red dot)
00:00:00
720P
00/00/00 00:00:00
You can modify the size of the display format
> Setup > Film size > 1080p or 720p
00:00:00
1080P
00/00/00 00:00:00
Film size
Full HD - 1080p
Shot Mode (Photo)
PHOTO
To take a Photo, make sure that the camera is in Photo mode. If the Photo icon
displayed on the LCD screen of your camera, press
To take a photo :
Press and release the pressure. The camera emits a beep, the red status indicator light
blinks for each captured shot.
EN
00:00:00
720P
00/00/00 00:00:00
Film size
HD - 720p
is not
multiple times until it appears.
31