Buhnen HB 240 Traduction Du Mode D'emploi Original page 16

Safety instructions
GB
mance range. Do not carry the tool by its cord and
do not pull the cord to disconnect the plug from the
socket. Protect the cable from heat, oil and sharp
edges.
Be aware of toxic gases and ignition hazard.
Toxic gases can develop when processing plastics,
paints and similar materials.
Be aware of the fire and ignition hazard.
For your own safety, only use accessories and addi-
tional equipment that are specified in the operating
instructions or have been recommended or indicated
by the tool manufacturer.
The use of tools or accessories other than those
recommended in the operating instructions or catalo-
gue may result in personal injury to you.
Repairs only by a qualified electrician
This power tool complies with the relevant safety re-
gulations. Repairs that have not been carried out by
a qualified electrician may result in accidents to the
operator. If the mains connection cable of this device
is damaged, it must be replaced by the manufacturer
or his customer service or a similarly qualified person
in order to avoid hazards.
Keep these safety instructions in a safe place
with the device.
16
HB250XM_SW_171216.indd 16 08.01.18 13:34