Using Your Ceramic Hob - LIMIT LIVK60C Mode D'emploi

Using your Ceramic Hob

To start cooking
• After power on, the buzzer beeps once, all the indicators light up for 1
second then go out, indicating that the ceramic hob has entered the state
of standby mode.
1. Touch the ON/OFF
show "-"
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control
(e.g. zone 3#)
4. Select a heat setting by touching the "-" or
"+" control.
• If you don‟t choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
• By holding down either of these buttons, the
value will adjust up or down.
control. all the indicators
EN-11