Care And Cleaning - LIMIT LIVK60C Mode D'emploi

Care and Cleaning

What?
Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the glass)
Boilovers, melts, and
hot sugary spills on
the glass
Spillovers on the
touch controls
How?
1. Switch the power to the
cooktop off.
2. Apply a cooktop cleaner
while the glass is still
warm (but not hot!)
3. Rinse and wipe dry with a
clean cloth or paper towel.
4. Switch the power to the
cooktop back on.
Remove these immediately
with a fish slice, palette knife
or razor blade scraper
suitable for ceramic glass
cooktops, but beware of hot
cooking zone surfaces:
1. Switch the power to the
cooktop off at the wall.
2. Hold the blade or utensil at
a 30° angle and scrape the
soiling or spill to a cool
area of the cooktop.
3. Clean the soiling or spill up
with a dish cloth or paper
towel.
4. Follow steps 2 to 4 for
„Everyday soiling on glass‟
above.
1. Switch the power to the
cooktop off.
2. Soak up the spill
3. Wipe the touch control
area with a clean damp
sponge or cloth.
4. Wipe the area completely
dry
with a paper towel.
5. Switch the power to the
cooktop back on.
EN-19
Important!
• When the power to the
cooktop is switched off, there
will be no „hot surface‟
indication but the cooking
zone may still be hot! Take
extreme care.
• Heavy-duty scourers, some
nylon scourers and
harsh/abrasive cleaning
agents may scratch the glass.
Always read the label to check
if your cleaner or scourer is
suitable.
• Never leave cleaning residue
on the cooktop: the glass may
become stained.
• Remove stains left by melts
and
sugary food or spillovers as
soon
as possible. If left to cool on
the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety
cover
is retracted, the blade in a
scraper
is razor-sharp. Use with
extreme
care and always store safely
and
out of reach of children.
• The cooktop may beep and
turn
itself off, and the touch
controls
may not function while there
is
liquid on them. Make sure you
wipe the touch control area
dry before turning the
cooktop back on.