Installation
STEP 5 Adjust the door height and the door gap
To adjust the height of a door
CAUTION
• Insert only one snap ring. If you insert two or more snap rings, the rings may slip out
or make a rubbing noise.
• Keep the snap rings out of children's reach and keep them for future use.
• Do not raise the door too much. The door can contact and damage the top cover.
30
English
FDR_AW2-FS_DA68-03873A-00_EN.indd 30
Snap rings
The height of a door can be adjusted using the provided snap
rings, which come in 4 different sizes (1 mm, 1.5 mm, 2 mm,
and 2.5 mm).
1. Check the height difference between
2. Insert a suitable-sized snap ring (A)
the doors, and then lift up and hold the
door with the lower height.
between the door grommet (B) and the
hinge as shown.
2019-05-17
10:23:27