Functional Description - Makita FG01 Manuel D'instruction

3. Charge the battery cartridge with room
temperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F).
Let a hot battery cartridge cool down before
charging it.
Overview of the nailer
4
1
10
1. Battery cartridge
2. Fuel cover
3. Trigger
4. Indication lamp
5. Pusher button
6. Pusher lever
7. Magazine
8. Contact element
9. Lamp
10. Exhaust vent
012804

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure to remove the fuel cell, the battery
•
cartridge and nails before adjusting or checking
function on the tool.
Installing or removing battery cartridge
CAUTION:
Always switch off the tool before installing or
•
removing of the battery cartridge.
Hold the tool and the battery cartridge firmly
•
when installing or removing battery cartridge.
Failure to hold the tool and the battery cartridge
firmly may cause them to slip off your hands and
result in damage to the tool and battery cartridge
and a personal injury.
2
9
6
8
7
012805
To install the battery cartridge, hold it so that the battery
cartridge front shape fits to that of the battery installment
3
opening and slip it into place. Insert it all the way until it
locks in place with a little click.
5
012806
To remove the battery cartridge, withdraw it from the tool
while pressing the buttons on the side of the cartridge as
shown in the figure.
CAUTION:
Always insert the battery cartridge all the way until it
•
locks in place. If not, it may accidentally fall out of
the tool, causing injury to you or someone around
you.
Do not install the battery cartridge forcibly. If the
•
cartridge does not slide in easily, it is not being
inserted correctly.
Lighting up the lamp
CAUTION:
Do not look in the light or see the source of light
•
directly.
1
012822
To switch on the Lamp, press the lamp button. To
•
switch off the lamp, press the lamp button again.
6
1. Button
1
1. Lamp button