Pioneer PDP-6010FD Mode D'emploi page 90

Useful Remote Control Features
14
1
2
3
4
5
90
En
CBL/SAT control buttons
When the Mode switch is set to CBL/SAT, the cable converter or
satellite broadcast tuner connected to the display can be
operated using the buttons shown below (3, 4, 5, 8 and 9 for
cable converters and 1 to 7 for satellite tuners):
1. SAT MENU
6
2. ENTER,
7
3. 0 to 9
4. CH +/–
5. SOURCE 
8
9
6. SAT GUIDE
7. RETURN
Mode switch 8. CH ENTER*
(with "CBL/SAT"
selected)
9. CH RETURN*
*
• CABLE and SAT cannot be selected at the same time.
Displays the satellite broadcasting menu screen.
/ / /
ENTER:
Activates the selected function.
/ / /
: Selects items on the SAT GUIDE screen or SAT
MENU screen.
Press a button (or buttons) that corresponds to the channel
that you want to watch.
Selects a higher or lower channel.
Turns the equipment power on and off.
Displays the satellite broadcasting guide screen.
When the CBL/SAT menu is displayed, restores the
immediately previous screen.
Enters the selected channel with the direct channel
selection buttons.
Switches between the current channel and the channel you
were watching immediately before.
Some cable converter manufacturers do not preset CH
ENTER and CH RETURN.
Note