Setup; Setup Menu; Menu List - Pioneer VSX-534 Mode D'emploi

Setup Menu

Menu list

You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations" (
1. Input/Output 1. TV Out / OSD
Assign
2. HDMI Input
3. Digital Audio Input
4. Analog Audio Input
5. Input Skip
6. PERSONAL PRESET
Information
2. Speaker 1. Configuration
2. Crossover
3. Distance
4. Channel Level
5. Dolby Enabled
Speaker
6. Speaker Virtualizer
3. MCACC 1. Full Auto MCACC
2. MCACC Data Check
4. Audio Adjust 1. Dual Mono / Mono
2. Dolby
3. DTS
4. Volume
Contents
Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
Change input assignment between the input selectors and HDMI IN jacks.
Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks.
Change input assignment between the input selectors and AUDIO IN jacks.
You can skip inputs to which nothing is connected when selecting them with the INPUT
SELECTOR dial on the main unit or with the input selectors on the remote controller.
Confirm the registered contents of PERSONAL PRESET.
Change the settings of connection environment of the speakers.
Change the settings of crossover frequencies.
Set the distance from each speaker to the listening position.
Adjust the volume level of each speaker.
Change the settings of Dolby Enabled Speakers.
The Speaker Virtualizer function can be switched between On and Off.
Measure the test tone of each speaker and automatically set the optimal volume level and
crossover frequency.
Confirm the number of channels of the connected speakers and the contents and values of setting
items of each speaker.
Change the settings of multiplex audio playback.
Change the setting of when Dolby signals are input.
Change the setting of when DTS signals are input.
Change the Volume settings.
64
Connections
≫ ≫
Front Panel≫ Rear Panel≫ Remote≫
Playback

Setup

≫
p66).
p67
p67
p68
p68
p69
p69
p70
p70
p71
p72
p72
p72
p73
p73
p74
p74
p74
p74
≫