Installing The Gas Filter; Installation Without Accessories; Installation With Accessories - Truma Gasfilter Instructions De Montage

Installing the gas filter

Installation without accessories

Mounting directly on the gas pressure regulator with
M20 x 1.5 inlet screw connection, male thread.
Figure 1
Mounting directly on two-cylinder changeover systems with
M20 x 1.5 inlet screw connection, male thread (2 gas filters
required).
Figure 2

Installation with accessories

Mounting directly on gas pressure regulator by means of
optionally available elbow union 90° (part no. 50020-56000)
and gas filter angle bracket (part no. 50020-00379).
Figure 3
Installation in a different location to a gas pressure regulator
using optionally available additional kit DuoC (part no. 50020-
61100) and gas filter angle bracket (part no. 50020-00379).
Figure 4
EN 11