General Description; Functional Description; Scope Of Delivery; Functional Parts - FLORABEST FRP 350 C2 Traduction Du Mode D'emploi D'origine

The operator or user is responsible for ac-
cidents or damage to other people or their
property.
The manufacturer is not liable for any dam-
age caused by infringement of the condi-
tions of use or incorrect operation.

General description

Illustration of the most important
functional parts is to be found
on the front and back foldout
pages.

Functional description

The pump is fitted with a floating switch
which automatically cuts the pump in or
out, according to the water level. In the
case of an overload, the pump is cut out
by the built-in thermal protection switch.
When the motor has cooled down, it will
restart again on its own.
A height-adjustable plastic hook on the
aluminium tube can be suspended in the
rainwater butt, enabling water to be easily
removed with the use of a hosepipe. The
shut-off tap functions in the same way as a
water tap.

Scope of Delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Fully assembled pump
- 2 aluminium tubes
- Aluminium tube with plastic hook
- Flexible tube with shut-off valve
- 4 sealing rings (already mounted)
- Cable clip
- Instruction Manual

Functional parts

Pump
1 Carrying handle
2 Pressure connection, pump
3 Float switch cable
4 Float switch height-adjustment
5 Float switch guide
6 Floating switch
7 Filter (not shown)
8 Suction foot
9 Pump housing
10 Push-on ports for aluminium tubes
11 Mountings for aluminium tubes
12 Power supply cable/lead
Accessories
13 Bottom aluminium tube
14 Middle aluminium tube
15 Aluminium tube with plastic hook
16 Height adjustment screw
17 Pressure connection for garden
hosepipe
18 Shut-off tap
19 Cable clips
20 Flexible tube
21 1 large sealing ring (already
mounted)
22 Hook for suspending the pump
23 3 small sealing rings (already
mounted)
24 Cover cap
GB
41