Fitting The Floor Plate; Height Adjustment - attika PILAR Notice D'installation

FITTING THE FLOOR PLATE, HEIGHT ADJUSTMENT

FITTING THE FLOOR PLATE

RAIS/ATTIKA supply elegant floor plates made from hardened
glass that are designed for the shape of the wood-burning stove.
Floor plates can be purchased separately. The floor plate is
pushed in against the stove, which allows for occasional cleaning
under the plate.

HEIGHT ADJUSTMENT

The wood-burning stove is equipped with four adjustment screws
(1) below the stove.
Use the adjustment screws to ensure the wood-burning stove
stands level.
Use a 27 mm wrench to turn the adjustment screws.
1
12 - GB
Designe
ksj