Radio; Other Settings; Tuner Setting - JVC KD-R484 Mode D'emploi

RADIO

"ST" lights up when receiving an FM stereo broadcast with sufficient signal strength.
Search for a station
1
Press repeatedly to select FM or AM.
2
Press to search for a station automatically.
(or)
Press and hold until "M" flashes, then press repeatedly to search for a
station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2
Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and "MEMORY" appears.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press .
2
Turn the volume knob to select a preset number, then press the knob.

Other settings

1 Press and hold .
2 Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected/
activated or follow the instructions stated on the
selected item.
4 Press to exit.
To return to the previous setting item, press

TUNER SETTING

RADIO TIMER Turns on the radio at a specific time regardless of the current
source.
1 ONCE/DAILY/WEEKLY/OFF: Select how often the timer
will be turned on.
2 FM/AM: Select the band.
3 01 to 18 (for FM)/01 to 06 (for AM): Select the preset
station.
4 Set the activation day *
"M" lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM SRC] in [SOURCE SELECT] after
Radio Timer for AM is selected. ( 4)
SSM SSM 01–06/SSM 07–12/SSM 13–18: Automatically
presets up to 18 stations for FM. "SSM" stops flashing
when the first 6 stations are stored. Select SSM 07–12/
SSM 13–18 to store the following 12 stations.
*
1
Selectable only when [ONCE] or [WEEKLY] is selected in step
.
Default: XX
1
and time.
1
.
7
ENGLISH