Fritel WT 3498 Mode D'emploi page 14

houses; by clients in hotels, motels and other residential type
environments; bed and breakfast type environments.
 The appliance may also be used outdoor, on the following
conditions:
* The power cord is regularly examined for signs of damage.
If this is the case, do NOT use the appliance anymore, but
immediately return it to your sales point.
* The appliance must be connected to a socket-outlet
having an earthed contact 230V.
* The appliance must be supplied through a residual current
device (RCD) having a rated residual operating current NOT
exceeding 30 mA.
 NEVER touch the control buttons, the electrical cord or
the plug with wet hands, and NEVER immerse them in
water or any other liquid.
with a damp cloth.
immediately pull out the plug from the socket.
 A damaged power cord can cause electric shocks. NEVER
use the appliance if it is damaged, fallen or shows a
malfunction, or if the power cord or plug are damaged. In
all these cases return the appliance to your sales point or
recognized after sales service.
 After use remove the plug from the power point. Also
proceed this way when the appliance is NOT in use,
before cleaning and moving.
 NEVER use separate timers or remote control systems.
 ALWAYS place the appliance on a solid and flat base, such as a kitchen counter or
table, so that the appliance won't move or turn over.
 NEVER use the appliance outdoor.
 NEVER use extension cords or sockets. Place the appliance near a power point
and connect it directly. ALWAYS complete unroll the power cord.
 NEVER let the cord hang over the edge of the table or the counter.
 NEVER place the power supply cord near heat sources such as cookers, heatings
or ovens.
 Only use the appliance on the mains voltage as indicated on the identification
label.
 This appliance is only suited for household use, and NOT for professional use.
They are only to be cleaned
Should they get wet anyway,
14