Baud Rate; Data Output Rs 232 C; Technical Data; Pin Allocation Of Balance Output Bushing - KERN FKB A Série Mode D'emploi

Baud rate

The baud rate defines the transfer speed vie the interface, 1 Baud =
1 Bit/second.
 In weighing mode keep the PRINT key pressed until [Unit]
0.0
g
 Press the MODE key several times until „bAUd" is displayed.
Vn� T
 Acknowledge using SET key, the current setting is displayed.
BAUD�
 Use MODE key select the desired settings
 Use the SET key to confirm selection. The balance returns to

10 Data output RS 232 C

10.1 Technical Data

•
8-bit ASCII Code
•
1 start bit, 8 data bits, 1 stop bit, no parity bit
•
Baud rate selectable at 1200, 2400, 4800 , 9600 and 19200 baud
•
Miniature plug-in necessary (9 pole D-Sub)
•
For operation with interface faultless operation is only ensured with the correct
KERN – interface cable (max. 2m)

10.2 Pin allocation of balance output bushing:

Front view:
5
FKB_A-BA-e-1615
appears.
9600  4800  2400  1200  19200
weighing mode.
1
9 6
Pin 2: Transmit data
Pin 3: Receive data
Pin 5: Signal ground
33