Frigelux CB255RCA++ Manuel D'utilisation page 22

Masquer les pouces Voir aussi pour CB255RCA++:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 When disconnecting the appliance, grip the plug firmly and do not pull on the cable.
 This appliance is designed for food and beverage storage.
 Do not expose the appliance to direct sunlight.
 Keep the appliance away from candles, luminaires and open flames, in order to avoid fire
risk.
 The appliance is heavy. Be careful when moving it.
 If your appliance is equipped with castors, remember that these are only designed to
facilitate minor movements. Do not move the appliance over long distances.
 Do not lean or climb on the appliance or its elements.
 In order to avoid falling objects and to prevent damage to the appliance, do not overload
the compartments of the appliance.
 This refrigerating appliance is not intended to be used as a built-in appliance
To avoid contamination of food, please respect the following instructions:
 clean regularly surfaces that come in contact with food and accessible drainage
systems.
 Store raw meat and fish in suitable containers so that it is not in contact with or drip
onto other food.
Caution! Cleaning and servicing
 Before carrying out servicing, switch off the power supply and disconnect the appliance.
 When cleaning the appliance, do not use metal objects, steam systems, volatile fluids,
organic solvents or abrasive substances.
 Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
 To ensure proper electrical connection, follow the recommendations given in the present
manual.
 Unpack the appliance and visually check that it is not damaged. Do not connect a
damaged appliance. Inform your retailer or point of sale of any damage. In such a case,
keep the packaging.
 It is recommended that the appliance be allowed to settle for at least 4 hours before
connecting the electrical power supply, so that the compressor fluid feed is correct.
 Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation,
observe the installation recommendations provided.
 In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact
with walls or with any hot element (compressor, condenser). Observe the installation
recommendations.
 The appliance should not be placed close to radiators or cooking hot plates or gas rings.
 Check that electrical sockets remain accessible when the appliance is installed
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cb255rna++Cb255rra++

Table des Matières