Whirlpool AKZM 769 Manuel D'utilisation Et D'entretien page 27

Masquer les pouces Voir aussi pour AKZM 769:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SETTING END OF COOKING TIME /START DELAYED
IMPORTANT: the start delayed setting is not available for the following functions: FAST PREHEATING, BREAD/PIZZA,
GENTLE CONVECTION BAKE.
N.B.: with this setting, the selected temperature is reached in a more gradual way, so cooking times will be slightly
longer than stated in the cooking table.
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only
be done once cooking time has been set.
After setting cooking time, the display shows the end of cooking time (for example 15:45) and the symbol
To delay the end of cooking time, and thus also the cooking start time, proceed as follows:
1.
Turn the "Browse" knob to display the time you wish cooking to end (for example 16:00).
2.
Confirm the selected value by pressing button
has been made correctly.
3.
The oven will automatically delay the start of cooking so as to finish cooking at the set time.
At any time, however, set values (temperature, grill setting, cooking time) can be changed using button
followed by the "Browse" knob to change values and button
INDICATION OF THE RESIDUAL HEAT INSIDE THE OVEN
If at the end of cooking, or when the oven is switched off, the temperature inside the oven is over 50°C, the display shows the
word HOT and the current temperature. When the residual heat reaches 50°C, the display shows the current time again.
TIMER
This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta.
The maximum time which can be set is 23 hours and 59 minutes.
1.
With the "Functions" knob at zero, turn the "Browse" knob to display the desired time.
2.
Press button
to start the countdown. When the set time has elapsed, the display will show "00:00:00" and an acoustic
signal will sound. To mute the acoustic signal, press button
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press
and
are locked and the display shows a key symbol. This function can also be activated during cooking. To deactivate it, repeat the
above procedure. When the key-lock function is activated, the oven can be switched off by turning the knob to 0 (zero). In this
case, however, the previously selected function will have to be set again.
SELECTING SPECIAL FUNCTIONS
Turn the "Functions" knob indicator to the symbol
To browse, select and start one of these functions, proceed as follows:
1.
Turn the "Functions" knob to symbol
2.
Turn the "Browse" knob to scroll the list of functions; the function names are in English: DEFROST, KEEP WARM, RISING.
3.
Press button
to confirm.
: the two dots of end of cooking time flash, indicating that the setting
at the same time for at least 3 seconds. When activated, the functions associated with the buttons
to access a submenu containing three special functions.
: the display shows " DEFROST" along with this function's corresponding symbol.
to confirm.
(the time of day appears on the display).
GB25
flashes.
to go back,

Publicité

Table des Matières
loading

Table des Matières