Sony CDP-CE575 Mode D'emploi page 17

5
Push l AMS L to select the
character.
The selected character lights up, and the
flashing cursor appears to indicate the next
space to be input.
To insert a space
Press M.
If you have made a mistake
Press m/M to flash the incorrect character,
then input the correct character.
6
Repeat Steps 4 and 5 to input more
characters.
7
Press MENU to store the Disc Name.
Repeat Steps 1 to 7 to assign Disc Names to
other discs.
If you have made a mistake while
inputting the character
To correct the character which has been
input
1 Press m or M until the incorrect character
flashes.
2 Turn l AMS L until the desired character
appears.
To correct the character currently being
input
1 Press CLEAR to delete the incorrect character.
2 Input the correct character.
To insert a character between the input
characters
Press m or M until the cursor moves to the former
of the two characters, then press ENTER and input
the correct character.
Labeling discs using the
remote
1
Press DISC in Continuous Play Mode.
2
Press the number button of the disc
you want to assign a Disc Name, and
then ENTER.
3
Press NAME INPUT.
The flashing cursor ( ) appears.
4
Press CAPS to find the letter type you
want.
Each time you press the button, the letter
type changes cyclically among capital
letters (ABC), small letters (abc) and
numbers (123). To select a symbol, you
have to select the capital or small letter
type.
5
To input a letter, press the number
button corresponding to the letter you
want (indicated beside each number
button).
Each time you press the button, the letter
changes cyclically among the ones indicated
beside the button.
To input symbols, press the number button
1 repeatedly until the symbol you want
appears in the display.
To insert a space, press SPACE once.
To input a number, press the number button
you want.
6
Press M to select the character.
The selected character lights up, and the
flashing cursor appears to indicate the next
space to be input.
You can also go to the next space by
pressing other number buttons.
7
Repeat Steps 4 through 6 to input more
characters.
8
Press NAME INPUT to store the Disc
Name.
Repeat Steps 1 through 8 to assign Disc
Names to other discs.
Erasing the Disc Name
1
Follow Steps 1 and 3 in "Labeling discs
on the player" on page 16 to select the
Disc Name you want to erase.
2
Press CLEAR repeatedly until all the
characters disappear.
3
Press MENU.
17
US