Audio; Storage; Record Schedule - Abus IPCB62520 Manuel Utilisateur

7.6

Audio

Audio encoding:
Audio input:
Input volume:
Environmental noise filter: enable the digital noise reduction function for audio transmission here.
7.7

Storage

7.7.1 Record schedule

Post-record:
Overwrite:
Video stream:
Elapsed time:
Enable record schedule:
select the audio encoding for audio transmission here (G.722.1,
G.711ulaw, G.711alaw, MP2L2, G.726).
enables the audio input (only for cameras with built-in microphone and
microphone input).
adjustment of the input amplification for the microphone.
determine how long a video should be saved for after an event.
Determine the behaviour if an SD card/NAS is full (end recording
or replace oldest data with new data = cycle recording function).
Select the video stream for recording.
Set the number of days until the data are overwritten.
after enabling and configuration, video data are either saved
constantly or at certain times and if necessary when an event
occurs. The schedule can be configured using the Edit button.
93