Ceiling Installation - ADEO SCREEN LIFTSCREEN Manuel D'installation Et D'utilisation

ENGLISH – Rolling screen installation and operation manual
CEILING INSTALLATION (SECURITY SISTEM)
Proceed as described in picture 1, bring the screen close to the brackets (pos.1); block the rear part of the screen b
tighten the three screws on the bracket as far as they will go (pos.4).
WALL INSTALLATION (SECURITY SISTEM)
Proceed as described in picture 2, bring the screen close to the brackets (pos.1); block the rear part of the screen b
tighten the three screws on the bracket as far as they will go (pos.4).
FIG. 1
Position of the holes in the heads = Overall of the screen -23.25-23.25

CEILING INSTALLATION

Use the pocket on the head for fixing the screen on the ceiling with screws suitable for the screen's
weight and for the type of wall or ceiling.
Made by Adeo Screen sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Doc: LIFTSCREEN Installation Manual rev2 | 12.06.2017
Please verify that you are working with the latest revision of this document before specifying your screen.
WARNING: It 's absolutely forbidden to install the screen on mobile walls or unstable cables,th
the screen use plugs and screws suitable for the screen's weight and for the type of wall or cei
Screen width up to cm
Overall weight LiftScreen
Maximum screen weight anchoring on the bar
After fixing the LiftScreen to the wall, level the bar on which will be fixed the screen w
Secure the screen brackets on the nut M6 already inserted in the bar. S
07 INSTALLATION INSTRU
INSTALLATION THE SCRE
Fix the screen exclusively under the bar, no
250 350
Kg 22 Kg 30
60 kg
FIG. 2
WALL IN
Use the
weight a
Page 9